top of page

こもれび Heart LINK クラブのグループ

公開·22名のメンバー
Hunter Montgomery
Hunter Montgomery

Restore Factory Settings on Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone with Official Stock Rom


Official Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone Stock Rom




Are you looking for the official stock rom for your Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone? If yes, then you have come to the right place. In this article, I will show you how to download and install the stock rom on your device easily and safely.




Official Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone Stock Rom



But first, let me explain what is a stock rom and why you might need it for your Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone.


Benefits of installing stock rom on Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone




A stock rom is the official firmware that comes pre-installed on your device by the manufacturer. It contains the operating system, the user interface, the apps, and the settings that are optimized for your device. A stock rom is also known as a factory rom or a default rom.


There are many benefits of installing stock rom on your Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone, such as:


  • It can fix software issues such as bootloop, lag, crash, virus, malware, etc.



  • It can restore your device to its original state and remove any customizations or modifications that you have made.



  • It can unroot your device and remove any custom recovery or kernel that you have installed.



  • It can update your device to the latest version of Android and security patches.



  • It can improve the performance, stability, and battery life of your device.



So, if you are facing any of these problems or you just want to go back to the stock rom for any reason, then follow the steps below to download and install the stock rom on your Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone.


Requirements for installing stock rom on Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone




Download links




To install the stock rom on your Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone, you will need to download the following files:


File nameFile sizeDownload link


Stock rom file1.8 GB


USB driver8.3 MB


Flash tool6.4 MB


Note: The stock rom file is in zip format and contains the firmware, the flash tool, and the instructions. The USB driver is for Windows only and supports all Motorola devices. The flash tool is also known as RSD Lite and is compatible with Windows XP/Vista/7/8/10.


Pre-requisites




Before you proceed to install the stock rom on your Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone, make sure you have completed the following pre-requisites:


  • Backup all your important data such as contacts, messages, photos, videos, etc. to a safe place. Installing stock rom will erase all your data on your device.



  • Charge your device battery to at least 50% to avoid any interruption during the flashing process.



  • Enable USB debugging mode on your device by going to Settings > About phone > Tap on Build number 7 times > Go back to Settings > Developer options > Turn on USB debugging.



  • Disable any antivirus or firewall program on your computer as they may interfere with the flashing process.



  • Use a good quality USB cable and a working USB port on your computer to connect your device.



  • Follow the instructions carefully and do not skip any step.



How to install stock rom on Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone




Step 1: Install USB driver on your computer




The first step is to install the USB driver on your computer so that it can recognize your device when you connect it via USB cable. To install the USB driver, follow these steps:



  • Download the USB driver file from the download link provided above and save it on your computer.



  • Extract the USB driver file using any zip extractor software such as WinRAR or 7-Zip.



  • Open the extracted folder and double-click on the setup.exe file to launch the installation wizard.



  • Follow the on-screen instructions and agree to the terms and conditions to install the USB driver on your computer.



  • Once the installation is completed, restart your computer to apply the changes.



Congratulations, you have successfully installed the USB driver on your computer. Now you can proceed to the next step.


Step 2: Extract stock rom file on your computer




The next step is to extract the stock rom file on your computer so that you can access the firmware, the flash tool, and the instructions. To extract the stock rom file, follow these steps:



  • Download the stock rom file from the download link provided above and save it on your computer.



  • Right-click on the stock rom file and select Extract here or Extract to folder option depending on your zip extractor software.



  • Wait for a few minutes until the extraction process is completed. You will see a new folder with the same name as the stock rom file.



  • Open the new folder and you will see three subfolders: Firmware, Flash Tool, and Instructions.



Congratulations, you have successfully extracted the stock rom file on your computer. Now you can proceed to the next step.


Step 3: Launch flash tool on your computer




The next step is to launch the flash tool on your computer so that you can load the firmware and flash it on your device. To launch the flash tool, follow these steps:



  • Open the Flash Tool folder that you extracted from the stock rom file.



  • Double-click on the RSDLite.exe file to launch the flash tool. You may see a User Account Control prompt asking for permission. Click Yes to continue.



  • You will see a window with a blue background and several options. This is the flash tool interface.



Congratulations, you have successfully launched the flash tool on your computer. Now you can proceed to the next step. Step 4: Connect your device to your computer via USB cable




The next step is to connect your device to your computer via USB cable so that the flash tool can detect it and communicate with it. To connect your device to your computer via USB cable, follow these steps:



  • Turn off your device and remove the battery if possible.



  • Press and hold the Volume Down and Power buttons simultaneously for a few seconds until you see a black screen with some text. This is the bootloader mode or fastboot mode of your device.



  • Release the buttons and connect your device to your computer via USB cable. Make sure you use a good quality USB cable and a working USB port on your computer.



  • Wait for a few seconds until the flash tool recognizes your device. You will see a message saying "Connected" and a device ID in the flash tool interface.



Congratulations, you have successfully connected your device to your computer via USB cable. Now you can proceed to the next step.


Step 5: Load stock rom file into flash tool




The next step is to load the stock rom file into the flash tool so that you can flash it on your device. To load the stock rom file into the flash tool, follow these steps:



  • Open the Firmware folder that you extracted from the stock rom file.



  • Find the file with the extension .xml and copy its name. This is the firmware file that contains all the necessary information for flashing.



  • Go back to the flash tool interface and click on the button with three dots (...) next to the Filename field.



  • A new window will open where you can browse and select the firmware file. Navigate to the Firmware folder and select the .xml file that you copied earlier.



  • Click Open to load the firmware file into the flash tool. You will see a list of files that are part of the firmware in the flash tool interface.



Congratulations, you have successfully loaded the stock rom file into the flash tool. Now you can proceed to the next step. Step 6: Start flashing process and wait for completion




The next step is to start the flashing process and wait for completion. This is the most crucial step where you will flash the stock rom on your device. To start the flashing process and wait for completion, follow these steps:



  • Go back to the flash tool interface and make sure that your device is still connected and recognized by the flash tool.



  • Click on the Start button at the top of the flash tool interface to begin the flashing process. You will see a progress bar and a status message indicating the flashing process.



  • Do not disconnect your device or interrupt the flashing process until it is completed. This may take several minutes depending on the size of the firmware and the speed of your computer and USB connection.



  • Once the flashing process is completed, you will see a message saying "Finished" and a green circle with a check mark in the flash tool interface.



Congratulations, you have successfully flashed the stock rom on your device. Now you can proceed to the next step.


Step 7: Disconnect your device and reboot it




The final step is to disconnect your device and reboot it. This will complete the installation of the stock rom on your device. To disconnect your device and reboot it, follow these steps:



  • Disconnect your device from your computer by unplugging the USB cable.



  • Insert the battery back into your device if you removed it earlier.



  • Press and hold the Power button for a few seconds until you see the Motorola logo on your screen. This will reboot your device.



  • Wait for a few minutes until your device boots up and shows the setup wizard. You may see some messages saying "Optimizing apps" or "Finishing boot" during this process.



  • Follow the on-screen instructions to set up your device as per your preferences. You may need to enter your Google account, Wi-Fi password, language, etc.



Congratulations, you have successfully installed the stock rom on your Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone. You can now enjoy the official firmware on your device. How to verify if stock rom is successfully installed on Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone




After installing the stock rom on your Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone, you may want to verify if it is successfully installed and working properly. To verify if stock rom is successfully installed on your device, follow these steps:



  • Go to Settings > About phone and check the information such as model number, build number, Android version, security patch level, etc. They should match the official stock rom information that you downloaded earlier.



  • Go to Settings > System updates and check if there are any available updates for your device. If there are, you can download and install them to keep your device up to date.



  • Test the basic functions of your device such as calling, texting, browsing, camera, etc. and see if they work without any issues.



  • Check the battery life and performance of your device and see if they have improved after installing the stock rom.



If everything looks fine and works well, then you have successfully verified that the stock rom is installed on your Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone. If you encounter any problems or errors, then you can try the troubleshooting tips in the next section.


Troubleshooting tips for installing stock rom on Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone




Sometimes, installing stock rom on your Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone may not go as smoothly as expected. You may face some issues such as device not detected by flash tool, flashing process failed or stuck, device not booting up or stuck in bootloop, etc. To fix these issues, you can try the following troubleshooting tips:



  • Check the USB connection between your device and your computer and make sure it is secure and stable. Try using a different USB cable or USB port if possible.



  • Check the USB driver installation on your computer and make sure it is compatible with your device and flash tool. Try reinstalling or updating the USB driver if necessary.



  • Check the stock rom file that you downloaded and make sure it is not corrupted or incomplete. Try downloading it again from a reliable source if possible.



  • Check the flash tool settings and make sure they are correct and suitable for your device and firmware. Try using a different version of flash tool if possible.



  • Check the battery level of your device and make sure it is sufficient for the flashing process. Try charging your device before flashing if necessary.



  • Check the bootloader mode of your device and make sure it is unlocked and in fastboot mode. Try entering bootloader mode manually by pressing Volume Down and Power buttons simultaneously for a few seconds.



  • Check the firmware compatibility of your device and make sure it matches the model number, region, carrier, etc. of your device. Try using a different firmware file if possible.



If none of these tips work, then you can contact Motorola customer support or visit a nearby service center for further assistance.


Conclusion




In this article, I have shown you how to download and install the official stock rom on your Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone. I have also provided some benefits, requirements, steps, verification methods, and troubleshooting tips for installing stock rom on your device. I hope you found this article helpful and informative.


Installing stock rom on your Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone can be a great way to fix software issues, restore to factory settings, unroot your device, update your device, improve performance and battery life, etc. However, it can also be risky if you do not follow the instructions carefully or use incompatible files or tools. Therefore, I advise you to backup your data before flashing, follow the steps precisely, use reliable sources for downloading files and tools, and take precautions while flashing.


If you have any questions or feedback about this article or installing stock rom on your Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone, feel free to leave a comment below or contact me via email. I will try my best to answer them as soon as possible.


Thank you for reading this article and happy flashing!


FAQs




Here are some frequently asked questions related to installing stock rom on Motorola Moto G7 Optimo Maxx XT1955DL (Ocean) US TracFone with brief answers:



  • What is the difference between stock rom and custom rom?



A stock rom is the official firmware that comes pre-installed on your device by the manufacturer. It contains the operating system, the user interface, the apps, and the settings that are optimized for your device. A custom rom is a modified firmware that is developed by third-party developers or enthusiasts. It may offer additional features, customization options, performance enhancements, or support for newer Android versions that are not available on the stock rom.


  • Will installing stock rom void my warranty?



No, installing stock rom will not void your warranty as long as you use the official firmware that is compatible with your device and carrier. However, if you install a custom rom or root your device, then you may void your warranty and lose the official support from Motorola.


  • Will installing stock rom erase my data?



Yes, installing stock rom will erase all your data on your device such as contacts, messages, photos, videos, etc. Therefore, it is recommended to backup your data before flashing. You can use various methods to backup your data such as Google account, external SD card, cloud storage, PC software, etc.


  • How can I root my device after installing stock rom?



If you want to root your device after installing stock rom, you will need to use a compatible rooting method and tool for your device and firmware. You can search online for various rooting guides and tutorials for your device model and Android version. However, be aware that rooting your device may expose it to security risks, software issues, and warranty voidance.


  • How can I uninstall stock rom and install a custom rom on my device?



If you want to uninstall stock rom and install a custom rom on your device, you will need to unlock the bootloader of your device first. Unlocking the bootloader will allow you to flash any custom rom or recovery on your device. However, unlocking the bootloader will also erase all your data and void your warranty. You can follow the official guide from Motorola to unlock the bootloader of your device here: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a. After unlocking the bootloader, you can search online for various custom roms and flashing guides for your device model and Android version.


dcd2dc6462


グループについて

グループへようこそ!他のメンバーと交流したり、最新情報を入手したり、動画をシェアすることができます。

メンバー

  • こもれび HeartLINK
  • Lokawra Shiopa
    Lokawra Shiopa
  • horbucher kostenlos
    horbucher kostenlos
  • Alejandro Franquet
    Alejandro Franquet
  • Genevieve Cleopatra
    Genevieve Cleopatra
bottom of page